Location:
Search - usb key
Search list
Description: CH372 USB芯片 采用Verilog语言，实现FPGA与上位机通信，按键触发FPGA向上位机传数，USB测试软件向FPGA传数-CH372 USB chip using Verilog language, to achieve FPGA and PC communications, key trigger FPGA pass up crew numbers, USB test software to pass several FPGA
Platform: |
Size: 3072 |
Author: zhenli |
Hits:
Description: ch375模拟usb键盘，并通过串口来控制，实现各种按键-ch375 analog usb keyboard, and through the serial port to control, to achieve a variety of key
Platform: |
Size: 43008 |
Author: wjj |
Hits:
Description: NiosII的C代码,包括网卡,lcd,usb,串口,按键.-NiosII C code, including network cards, lcd, usb, serial, key.
Platform: |
Size: 209920 |
Author: julie |
Hits:
Description: 通过USB端口与PC机通信，用户按键K1~K4的键值可以通过USB发送到PC机上显示.-Through the USB port and PC communication, the user key press K1~K4 key can be sent by USB to the PC display
Platform: |
Size: 66560 |
Author: 海燕 |
Hits:
Description: stc12单片机做的点阵时钟，功能简介：
1、时间日期显示：
2、三按键菜单：
3、恋爱天数显示：
4、闹钟：
5、电池状态监测
6、多功能的LED指示：
在点阵屏上方有一排小LED，在右上方有一个大LED。正常时都不亮。
（1）当电池没电时，大LED变成红色；
（2）当插上USB充电时：大LED多种彩色变化，一排小LED随电量增势流水灯变化
（3）当充满电时：大LED变成绿色，小LED灭掉；
（4）当显示电量时：小LED按电量多少比例亮；
（5）当闹钟开关打开时：大LED变成蓝色
（6）当播放音乐时: 大LED多种彩色变化，小LED随音调趋势 变化。-STC12 microcontroller to do the lattice clock, function introduction:
1, the time and date display:
2, the three key menu:
3 days, love:
4, the alarm clock:
5, the battery state monitoring
6, multi function LED indicator:
There is a row of small LED in the screen above, there is a LED in the upper right. Normal is not bright.
(1) when the battery is dead, LED turns red
(2) when the plug in USB charge: LED a variety of color change, a row of small LED with the power increase water lights change
(3) when full power: LED turn green, small LED out
(4) when the display power: small percentage of LED according to the quantity of light
(5) when the alarm switch is open: LED blue
(6) when playing music: LED a variety of color change, small LED changes with the tone trend.
Platform: |
Size: 155648 |
Author: andy |
Hits:
Description: 在创兴的mb9bf506r demo上移植RT-thread，集成LCD、key、USB-HID(先插入usb线)等。-Chong Hing mb9bf506r demo in transplant RT-thread, integrated LCD, key, USB-HID (first insert usb cable) and so on.
Platform: |
Size: 2653184 |
Author: 独行虾 |
Hits:
Description: 实现自定义的USB编程。启用了D12的端
点1和端点2，端点1为中断传输，最大包为16字节，查询间隔为10ms。端点2为批量
传输，最大包为64字节。端点1的输出第一个字节为控制END USB板上的LED的，每个
bit代表一个LED，为1时表示对应的LED亮。端点1的输入第一个字节为返回的开关
状态，每个bit代表一个按键，为时表示对应的按键按下。输出端点2的数据通过串
口发送出去，串口接收到的数据通过端点2返回。-Implement custom USB programming. D12-enabled endpoint 1 and endpoint 2, Endpoint 1 interrupt transmission, maximum packet is 16 bytes, the query interval is 10ms. Endpoint 2 is bulk transfer, maximum packet is 64 bytes. Endpoint 1 output of the first byte of the control END USB board LED, each bit represents a LED, to 1 indicates that the corresponding LED lights up. Endpoint 1 is the first byte of the input switching status is returned, each bit represents a key, too indicates that the corresponding button is pressed. The data output terminal 2 sent via the serial port, serial data received via endpoint 2 return.
Platform: |
Size: 102400 |
Author: zxh |
Hits:
Description: TI LM4F232 Usb Example code ,实现按键打字的功能，把按键的信息通过USB接口传送给上位机；在PC机上显示一串字符-TI LM4F232 Usb Example code, to achieve key typing function, the key message sent through the USB interface to the host computer string of characters displayed on the PC
Platform: |
Size: 702464 |
Author: Jack |
Hits:
Description: FX2LP GPIF 是一款高度可配置、具有高度灵活性的硬件，使您能够充分利用 USB 2.0 设计，并适用于需外部主设备进行信息交换的应用。本文档可作为与 FX2LP GPIF 进行外设连接的 USB 2.0 的理想指南。
在提出基本 GPIF 概念前，本文档首先介绍了 EZ-USB® FX2LP™ 的基础架构，以便您对 GPIF 如何适用于总数据路径有一个透彻的了解。接着介绍了开发 GPIF 应用的方法。这便于您掌握组成一整套 GPIF 应用解决方案的关键组件，以及将 GPIF 与外部从设备相连的框架。采用这一方法，面对 GPIF 的复杂特性，您就可以做到驾轻就熟，同时还可确保高成功率。-FX2LP GPIF is a highly configurable, highly flexible hardware, enabling you to take full advantage of USB 2.0 design and apply an external master device requires the application of information exchange. This document can be used as an ideal guide for USB 2.0 peripherals with FX2LP GPIF be connected. Before making basic GPIF concepts, this document introduces the infrastructure EZ-USB FX2LP ™ so that you have a thorough understanding of how to apply to the total GPIF data path. Then describes a method developed GPIF applications. This allows you to master the key components that make up a complete set of GPIF application solutions, as well as the framework of the GPIF from the device connected to the external. Using this approach, the face of the complex nature of GPIF, you can do very much at home, while also ensuring a high success rate.
Platform: |
Size: 164864 |
Author: 呼延郎 |
Hits:
Description: 在tq2440开发板下的usb鼠标当做按键的驱动-In usb mouse tq2440 development board, as a key driver
Platform: |
Size: 2048 |
Author: Inrespon |
Hits:
Description: DMC-9263-E采用基于ARM926EJ-S内核的ATMEL处理器AT91SAM9263, 运行频率200MHz。板载64MB的SDRAM，64MB的Nand Flash，2MB的Data Flash。DMC-9263-E嵌入式开发系统外设非常丰富，功能强大，可扩展性强，低功耗。适用于纺织行业、数控行业、汽车电子、工业触摸屏控制系统、机器人视觉、媒体处理无线应用、数字家电、车载设备、通信设备、网络终端等场合。支持嵌入式Linux和WINCE5.0操作系统。
采用Linux2.6.20内核，LINUX驱动支持：AUDIO、VGA、USB HOST、以太网、CAN、LCD 和触摸屏、IDE、SD卡、CF卡、串口等，支持QT。
WINCE5.0测试程序：蜂鸣器、GPIO、KEY、RS232等,并提供WINCE完整的镜像文件
-DMC-9263-E using the ARM926EJ-S core ATMEL processor based on AT91SAM9263, the operating frequency of 200MHz. On board 64MB SDRAM, 64MB Nand Flash, 2MB Data Flash. The DMC-9263-E embedded development system peripherals is very rich, powerful, extensible, low power. Is suitable for the textile industry, the CNC industry, automotive electronics, industrial touch screen control system, robot vision, media processing wireless application, digital home appliances, vehicle equipment, communication equipment, network terminal and other occasions. Support Linux and embedded WINCE5.0 operating system.
Platform: |
Size: 29696 |
Author: 龙芯 |
Hits:
Description: DMC-2440-H采用基于ARM920T内核的Samsung处理器 S3C2440A, 标准主频400MHz，最高主频可达533MHz。采用64MB的SDRAM，2MB的NOR FLASH和64MB的NAND Flash。DMC-2440-H嵌入式开发系统外设非常丰富，功能强大，适用于各种手持设备、消费电子和工业控制设备的开发。支持嵌入式Linux和WINCE5.0.NET操作系统。
采用Linux -2.6.134内核，LINUX驱动支持：DM9000 网卡、串口、RTC、LED、按键、触摸屏、USB鼠标和键盘、SD/MMC 卡、Nand Flash、UDA1341 音频、LCD、优盘、USB 摄像头。支持QT, 支持MP3播放和视频播放。
WINCE5.0驱动支持：LCD、DM9000、按键、LED、NandFlash、串口、触摸屏、USB host & slave、音频等。
测试程序（ADS1.2项目文件）：RTC、ADC、key、Touchpanel、LCD、VGA、EEPROM、UDA1341、SD Card、CMOS Camera等。-DMC-2440-H based on ARM920T core Samsung processor S3C2440A, standard frequency of 400MHz, the highest frequency is 533MHz. Using 64MB SDRAM, 2MB NOR FLASH and 64MB NAND Flash. The DMC-2440-H embedded development system peripherals is very rich, powerful, suitable for development in various handheld devices, consumer electronics and industrial control equipment. Support Linux and embedded WINCE5.0.NET operating system.
Platform: |
Size: 28672 |
Author: 龙芯 |
Hits:
Description: DMC-2440-F采用基于ARM920T内核的Samsung处理器 S3C2440A, 标准主频400MHz，最高主频可达533MHz。采用64MB的SDRAM和64MB的Nand Flash。DMC-2440-F嵌入式开发系统外设非常丰富，功能强大，适用于各种手持设备、消费电子和工业控制设备的开发。支持嵌入式Linux和WINCE5.0.NET操作系统。提供完整的Wince5.0 BSP。
采用linux-2.4.18内核，支持多种文件系统,像cramfs、yaffs2、ext2、Fat、NFS等。linux驱动支持：串口、10/100M网口、音频、USB Host、LCD、触摸屏、USB鼠标、U盘等，支持Qt图形界面。
Wince5.0驱动支持：LCD、触摸屏、KEY 、Nandflsh、串口、USB等-DMC- 2440- F the Samsung processor S3C2440A based on ARM920T kernel, standard frequency 400 MHZ, the highest frequency of up to 533 MHZ. The 64 MB SDRAM and 64 MB Nand Flash. DMC- 2440- F embedded development system peripherals is rich, powerful functions, suitable for all kinds of handheld devices, consumer electronics and industrial control equipment development. Support the embedded Linux operating system and WINCE5.0.NET. Provide complete Wince5.0 BSP.
The Linux- 2.4.18 kernel, support for multiple file system, like cramfs, yaffs2, however, Fat, NFS, etc. Linux driver support: a serial port, 10/100 m so, audio, USB Host, LCD, touch screen, USB mouse, U disk, etc., to support Qt graphical interface.
Wince5.0 driver support: LCD, touch screen, KEY, Nandflsh, serial port, USB, etc
Platform: |
Size: 31744 |
Author: 龙芯 |
Hits:
Description: DMC-2440-I采用基于ARM920T内核的Samsung处理器 S3C2440A, 标准主频400MHz，最高主频可达533MHz。板载64MB的SDRAM，128MB的Nand Flash以及2MB的Nor Flash。DMC-2440-I是根据S3C2440A的全部功能而开发的全功能嵌入式系统。具有外接资源丰富，性能稳定，低功耗低等特点。适合手持设备的设计开发。支持嵌入式Linux和WINCE5.0.NET操作系统。提供Wince5.0 BSP。
采用linux-2.6.29 内核,驱动支持：DM9000、各种真彩液晶、音频输入输出、触摸屏、支持高速大容量的SD 卡、RTC、看门狗、三个串口、万能USB 摄像头、鼠标和键盘、U盘,支持QT。
Wince5.0驱动支持：ATA硬盘、camera 、CS8900网口、LCD、 DM9000网口、 IIC、 Key 、LED、串口、SDHC卡、触摸屏、USB 、AC97音频、IIS等。
测试程序(ADS1.2项目文件)：中断方式按键、RTC 实时时钟、ADC 数模转换、IIS 音频播放wav、IIS 音频录音、触摸屏、I2C 总线读写AT24C08、三星3.5”LCD、640x480 真彩液晶等。-DMC- 2440- I Samsung processor S3C2440A based on ARM920T kernel, standard frequency 400 MHZ, the highest frequency of up to 533 MHZ. Onboard 64 MB SDRAM, 128 MB Nand Flash and 2 MB of Nor Flash. The DMC- 2440- I was based on S3C2440A all of the features and the development of a fully functional embedded systems. Has the rich external resources, stable performance, low power consumption is low. Design and development for handheld devices. Support the embedded Linux operating system and WINCE5.0.NET. Provide Wince5.0 BSP.
The Linux- 2.6.29 kernel driver support: DM9000, all kinds of true color LCD, touch screen, audio input and output, support high speed large capacity of the SD card, RTC, watchdog, three serial ports, universal USB camera, mouse and keyboard, U disk, support QT.
Wince5.0 driver support: ATA hard disk, camera, CS8900 front-end ports, LCD, DM9000 front-end ports, IIC, keys and leds, serial ports, SDHC CARDS, touch screen, USB, AC97 audio, IIS, etc.
Test program (ADS1.2
Platform: |
Size: 29696 |
Author: 龙芯 |
Hits:
Description: CC301内部测试程序源代码
CC301语音盒免费提供专业二次开发包SDK和电话录音弹屏软件！电话录音系统是USB接口可扩容多路电话录音系统，使用USB接口与PC联机，具有来电记录、去电记录、来电弹屏、商务管理、实时监听、网络监听等强大功能，可广泛的应用于商业电话，电力调度，热线服务电话，关键岗位电话，金融证券，**报警，安全部门的监听电话、航空、铁路、交通运输调度录音及各行业的生产调度录音。-CC301 internal test source code
CC301 voice box free to provide professional development kit SDK and phone audio recording screen software two! Telephone recording system is USB interface can be multiway dilatancy telephone recording system, using USB interface and PC online, with the call records, to the powerful functions of electrical recording, call screen play, business management, real-time monitoring, network monitoring, etc., and can be widely used in commercial telephone, electric power dispatching, telephone hotline service, telephone in key position, financial securities, security alarm and security department telephone monitoring, aviation, railways, transportation scheduling recordings and industry production scheduling recordings.
Platform: |
Size: 1135616 |
Author: 李陆勇 |
Hits:
Description: 包含PDIUSBD12使用中的关键函数，有了这些函数你可以轻松的使用PDIUSBD12芯片，用于USB通信协议的开发。-It contains PDIUSBD12 use key functions with these functions you can easily use PDIUSBD12 chip for developing USB communication protocol.
Platform: |
Size: 2048 |
Author: diaoshipu |
Hits:
Description: ：随着移动通信技术的迅速发展和广泛应用，手机内部包含的信息已经成为犯罪侦查重要的线索和证据来
源。由于人们对数据安全和隐私保护意识的提高，以及涉案嫌疑人的反侦查意识的增强，涉案的智能手机通常
带有锁屏密码，在这种情况下，如何对其中的数据进行提取、处理和分析成为一个重要的研究方向。本文主要
针对Android 手机的锁屏问题进行研究，详细介绍了Android 智能手机三种锁屏密码，即手势密码、PIN 码密
码以及复杂密码的文件结构和存储原理，分析了如何借助Android 的ADB（Android debug bridge）调试模式方
法来对Android 智能手机进行手动的密码绕过或清除，针对Android 手机在调试模式打开和未打开的情况下提
出了不同的解决方法用于对手机进行密码破解和清除，这些方法在笔者实践中证明具有较高的实用性。-It is quite common to come across a locked mobile phone in case investigations. How to bypass the screen’s
lock presents a challenge towards digital forensic investigators. This article focused on bypassing the locked screen of Android
smart phones. Three different types of Android passcodes, gesture, PIN code and complex, were introduced along with
their storage principle and file structures. To make the brute forcer successfully get the pattern code depended on acquiring
the passcode key file. Bypassing the screen lock could be achieved by using ADB (Android debug bridge). Two different
approaches to solve the problems on getting passcode were suggested with the conditions of mobile phone’s USB debugging
mode at on or off. When USB debugging mode was on, investigators could try to gain root access into the phone and apply
adaptable method to decrypt or remove the screen lock. But if the USB debugging mode was off, the custom recovery
method could be used to flash on the phone
Platform: |
Size: 1449984 |
Author: 小哥啊 |
Hits:
Description: Fanuc multi key virtual USB multikey driver-Fanuc multi key virtual USB multikey driver
Platform: |
Size: 27648 |
Author: Cong |
Hits:
Description: LC970A是一款大功率WiFi模块。针对远距离传输等应用，LC970A采用高集成度单芯片RT3070方案，
配合输出功率达27DBm/500mw的高性能外置PA（射频功率放大器）和低噪声放大器，可以显著提升WiFi
传输效能。配套合适天线，可以获得300-500米的通讯距离。
LC970A 软件驱动层面支持良好，可以在Windows/Linux/Android等多系统下稳定运行，不仅支持
station模式，而且可以工作在softap模式。此外，LC970A也可以良好支持smartconfig，smartlink，zerolink
等一键配置功能。
LC970A模块采用USB接口，方便客户直接连接电脑使用。-LC970A is a high power WiFi module for long-distance transmission. LC970A uses high integrated single chip RT3070, high-performance external PA with 27 dbm/500mw output power(RF power amplifier) and the low-noise amplifier, can significantly improve WiFi transmission efficiency and obtain 300-500 meters communication distance with appropriate antenna.
LC970A has a good software driver and can operate stably under Windows/Linux/Android system. It supports not only STA mode but also AP mode and it also supports one key configuration function such as smartconfig, smartlink, and zerolink. LC970A module uses USB interface for clients to connect computer directly.
Platform: |
Size: 1042432 |
Author: 张军 |
Hits:
Description: rocky simulator 2(32bit) HD USB hardware key, UID has key people to round form
Platform: |
Size: 390144 |
Author: 2105 |
Hits:
«
1
2
...
5
6
7
8
9
1011
»